Description
An effective and easy upgrade for your engine!
Fits the following models only:
1993-1995 Chevy Camaro Model with 3.4L V6 Engine
1993-1995 Pontiac Firebird Model with 3.4L V6 Engine
Up to 10% more Horsepower and Torque
Better Throttle Response
T-6063 Aluminum High Quality Finished Intake pipe
Premium washable and reusable Air Filter
10-30 Min Installation (No Installation Guide)
Includes what is shown for installation
Why change your factory air box for an intake?
- Gain more Horsepower
- Better Acceleration
- Improved Fuel Economy
- Enhanced Sound - A deeper or throaty tone
- Sporty Engine Look
- Spend Less on Filters - Can be cleaned and re-oiled
Installation is fairly easy and only involves removal of your factory air box.
Basic tools are required including screw drivers and socket wrenches to remove the factory air box. You can also search on YouTube for videos showing air box removal for your vehicle.
Most customers can install an aftermarket air intake within 1 hour
It is advised to RESET your battery terminal for a few seconds so your engine computer can re-learn the increase in air flow. Always disconnect your battery when performing engine work.
IMPORTANT INSTALLATION INFORMATION CLICK HERE
To install the air intake kit correctly, please remove the factory air filter box and the resonator (The black plastic box on top of the radiator) and install the air intake pipe into the black rubber factory air intake tube.
Then please install the air filter at the end of the shorter pipe and install both of them from the bottom of the engine bay by removing the black plastic bottom engine cover thru the hole under the factory air filter box. Or you can install it by removing the driver side wheelwell plastic panels.
You can also click on the link above for installation information and we also attached some pictures of how this kit installs with no problem.
Please refer to the installed pictures. If the air intake pipe is too short, please pull some of the air intake pipes out from the coupler and leave some spaces in between the air intake pipes inside the rubber coupler and it will extend the length of the it intake pipe.
Any question or problem, please take send us pictures with different angles so we can check for you ASAP.
