Performance Logic Plus Performance Chip Module Stage 4 3-IN-1 for Kenworth
Performance Logic Plus+ (PLP+) is unique in the way it can increase your vehicles performance while at the same time offering two additional features not found on our other performance modules.
Add horsepower, torque, diagnostics and real time performance data to your vehicle! The ultimate performance module with visual display and OBD2 diagnostics.
- Next Generation 800Hz CPU Processor
- Up to 40HP and 40TQ
- Custom Tuned for your vehicle model and engine type
- Simple self-installation with suction cup or double-sided tape
- Live Speed Display
- Live RPM Display
- Adjustable RPM Shift Point Warning
- Trip Mileage and Time
- Fuel Consumption Data
- Coolant Temperature
- Brake and 0-60 Speed Time Tests
- Battery Voltage Level
- Compatible with most vehicles 1996+
- OBD2 Live Data on Display
- Read and Erase Check Engine codes on the fly
- Reads real time data through your OBD2 port
- Basic bolt-on performance parts will not require a retune of your ECU
- Adjustable Mounting Bracket with suction cup
- OBD2 Port plug found under dash
- Auto On, Standby when vehicle is off, uses little to no power
- Will not drain your battery
Connection to your OBD2 port is required. OBD2 ports can be found under the drivers dash, enter or left kick panel side. Mount the display to a secure location using the provided suction cup or double sided tape.
Custom Programmed for your Kenworth, Works with:
✓ Turbo-diesel Engines
✓ Diesel Engines
✓ Works with both Manual and Automatic transmissions!
Unmatched 100% Money Back Satisfaction Guarantee
If you are not happy with your purchase, send it back for a full refund!
What do you have to lose!?
Do I need any special tools or automotive knowledge to install?
No! Unlike other products which require you to cut into your sensors in the vehicle; this product is truly 100% plug and play. Compatible with vehicles 1996+ and is tuned for your model. Watch out for those cheap $10-50 mega horsepower products. They are all gimmicks and typically a plastic box with empty space or a resistor in a box that can burn out your wiring and computer.
Does this product work with automatic and manual?
Does this product work with 2WD or 4WD
Works on both types if your car has options
Does this product work with Supercharged or Turbocharged Engines?
Will this product void my warranty?
No! it will not void your warranty, many dealers frown on any performance upgrades. However, under the law, the manufacturer cannot void your warranty for adding aftermarket parts. The unit removes as easily as it installs. So it can be removed before taking the vehicle to the dealer for service. This is the easist way to avoid any dealer concerns.
(Thanks to the Magnuson Moss Warranty Act: US Code – Title 15, Chapter 50, Sections 2301-2312, your vehicle’s factory warranty is protected by law when you add aftermarket parts.)
Can this harm my engine or vehicle electronics?
No, not at all. Zero% chance of any harm. Our products have been DYNO tested and proven to work without any bad effects on the vehicle. We guarantee this!
Can this place excess strain on my vehicle engine and transmission?
Not at all! All of the OEM engine software safety features are left fully intact and are not disabled. So you will benefit from the added performance without sacrificing the reliability!
Can I read and reset check engine lights?
Yes! Makes buying diagnostic code readers obsolete. Read and reset MIL/DTC check engine codes related to engine and emission system. Mechanic approved!
Do I need to use Stage 1 first in order to use Stage 2, 3, 4?
No, Stages will determine how much power you're able to extract from your vehicle, you will not need to upgrade from one Stage to another.
STAGES Quick Comparison:
|STAGE 1 (FUEL SAVER CHIP)||<20HP Increase||+16.2 ft·lbs||<4MPG|
|STAGE 2 (ALL-AROUND CHIP)||<30HP Increase||+24.2 ft·lbs||<2MPG|
|STAGE 3 (FOCUSED IN POWER)||<40HP Increase||+32.3 ft·lbs||N/A|
|STAGE 4 (FOCUSED IN POWER + TECHNOLOGY)||<40HP Increase||+32.3 ft·lbs||N/A|