Cold Air Intake W/Heat Shield for RAM 1500 (2019-2024) with 5.7L V8 Engine Black Stage 2

Boost your 5.7L HEMI's performance with this complete cold air intake system—unlock additional horsepower, improve throttle response, and add that deep V8 growl the HEMI name deserves.

More Power from Dodge's Modern HEMI V8

The 2019-2024 5.7L HEMI V8 delivers 395 horsepower and 410 lb-ft of torque from the factory—impressive numbers that make it the most popular engine choice in the RAM 1500 lineup. But Dodge had to balance performance with fuel economy regulations, emissions compliance, and cabin noise levels. The result is a restrictive factory airbox that prioritizes silence and efficiency over maximum airflow. Variable valve timing, active intake manifolds, and the MDS cylinder deactivation system are all working to squeeze every mile out of each gallon, but that conservative tuning leaves usable power on the table.

This cold air intake system addresses that restriction by replacing your stock air filter and intake tube with a high-flow design featuring an integrated heat shield. The result is 10+ additional horsepower with improved throttle response across the RPM range—noticeable gains in acceleration and passing power that complement the HEMI's already strong mid-range torque. The heat shield keeps intake air temperatures down by isolating the filter from radiant engine heat, ensuring cooler, denser air reaches your throttle body. You'll also get that deeper, throatier V8 intake tone that makes the HEMI sound as aggressive as it performs. The washable, reusable filter requires cleaning only every 50,000 miles, eliminating recurring filter replacement costs.

Key Features at a Glance

• 10+ Horsepower Gains: High-flow design recovers power lost to the restrictive factory airbox with improved throttle response throughout the RPM range
• Integrated Heat Shield: Isolates the air filter from engine bay heat, delivering cooler, denser intake air for better combustion efficiency
• Enhanced V8 Sound: Deeper, more aggressive intake tone adds character under acceleration—hear the HEMI working like it should
• Washable, Reusable Filter: High-flow synthetic media requires cleaning only every 50,000 miles under normal conditions—long-term savings over disposable filters
• Improved Fuel Efficiency Potential: More efficient airflow can improve MPG during normal cruising when not using the extra power

How It's Used: Installation & Fitment

Installation involves removing your factory airbox assembly and installing the new high-flow intake system in its place. Disconnect the factory intake tube from the throttle body, unbolt the airbox from its mounting points in the engine bay, and remove the complete assembly. The new intake piping connects to the throttle body using the provided clamps, with the high-flow filter mounting in a location protected by the integrated heat shield. The kit includes all necessary mounting hardware, clamps, and detailed instructions. Most installations take 45-60 minutes using basic hand tools—screwdrivers, socket wrenches, and pliers for the hose clamps. Numerous YouTube tutorials walk through the process step-by-step if you want visual guidance. After installation, disconnect the battery terminal for 10-15 seconds to reset the ECU, allowing it to recalibrate for the increased airflow and optimize performance.

Product Durability & Material Details

The intake piping is constructed from lightweight, heat-resistant materials designed to withstand the temperature extremes of the engine bay environment. The high-flow air filter uses advanced synthetic media that flows significantly more air than the factory paper element while maintaining proper filtration to protect your engine. The integrated heat shield is critical for maintaining performance—it creates a barrier between the filter and radiant engine heat, ensuring intake air stays as cool as possible. Cooler air is denser, which means better combustion efficiency and more power. The filter is designed to be washed and reused rather than replaced—simply remove it every 50,000 miles, clean it with soap and water, let it dry completely, and reinstall. No oiling required, which eliminates the risk of contaminating your mass airflow sensor. The improved airflow efficiency can result in small fuel economy gains during normal highway cruising, though aggressive driving will consume more fuel as you take advantage of the performance increase.

Your Benefits at a Glance

• Noticeable Performance Boost: Sharper throttle response and improved acceleration for highway passing and merging
• HEMI Character Restored: Deeper intake tone makes your V8 sound more aggressive without excessive noise during normal driving
• Long-Term Savings: Washable filter eliminates recurring replacement costs over the life of your truck
• Cooler Intake Temps: Heat shield keeps air temperatures down for consistent performance even in hot weather

Extra Info & Specifications

Fitment:

• 2019-2022 vehicles equipped with 5.7L (345 cu. in.) V8 gasoline engine
• OHV (overhead valve) naturally aspirated configuration
• Compatible with both 2WD and 4WD models
• Works with RAM 1500 models equipped with 5.7L HEMI V8 (with or without eTorque)
• May also fit Toyota Tundra with 5.7L V8 (verify fitment before ordering)

Performance Specifications:

• Horsepower Gain: 10+ hp at the wheels
• Improved throttle response and acceleration
• Enhanced intake sound with deeper V8 tone
• Potential for improved fuel efficiency during normal cruising

Filter Specifications:

• Type: High-flow washable synthetic media (no oiling required)
• Service Interval: Every 50,000 miles under normal driving conditions
• Cleaning: Wash with soap and water, dry completely, reinstall
• Filtration: Maintains proper engine protection while maximizing airflow

Installation Notes:

• Basic hand tools required: screwdrivers, socket wrenches, pliers
• Typical installation time: 45-60 minutes
• Complete factory airbox removal required
• Disconnect battery terminal briefly after installation to reset ECU
• YouTube tutorials available for visual installation guidance
• No permanent modifications to vehicle required

Package Includes:

• High-performance air intake piping
• Washable, reusable high-flow air filter
• Integrated heat shield
• All necessary mounting hardware and clamps
• Installation instructions