Cold Air Intake Kit for Dodge Challenger (2011-2021) with 3.6L V6 Engine Blue

2011-2021 DODGE CHALLENGER 3.6L V6 ENGINE

• The ultimate performance Cold Air Intake Kit for 3.6 L (220 cu in) Pentastar DOHC V6
• The air intake kit can help your engine to draw in more cold air resulting in better throttle response and higher explosive horsepower output
• It can increase 8-10% of Horsepower and 6-8% of torque
• Easy to install and easy to fit with simple tools
• No additional parts will be needed for installation after you purchase this kit

THE ULTIMATE INTAKE

• T306 Aluminum Polished Finished Intake pipe as shown in the picture
• High quality built Washable and Reusable Air Filter as shown in the picture
• All necessary mounting hardware, vacuum hoses and reducers will be included like in the picture
• 10-20 Min Install Job

Includes

• 3 piece of aluminum pipes
• 7 hose clamps
• 3 black silicone couplers
• 1 black air breather hose
• 1 cone air filter
• 1 set of Aluminum bracket
• No Heatshield Included, intake is as pictured
• For our intake with heatshield, see here: https://www.performancechiptuning.com/cold-air-intake-kit-for-dodge-charger-2011-2020-with-3-6l-v6-engine-chrome-shielded/

Why swap out your factory air box for an intake?

- More Horsepower
- Increased Acceleration
- Improved Gas Mileage
- Enhanced Sound - A deeper or throaty tone
- Spend Less on Filters - Can be cleaned and re-oiled
Installation typically is fairly easy and only involves removal of your factory air box. You should have basic tools including screw drivers and socket wrenches to remove the factory air box. You can also search on YouTube for videos showing air box removal for your vehicle.
Most customers can install an aftermarket air intake within 1 hour
It is advised to reset your battery terminal for a few seconds so your engine computer can re-learn the increase in air flow. Always disconnect your battery when performing engine work.