Cold Air Intake for Toyota Tacoma (2005-2011) 4.0L V6 Engine

Premium Cold Air Intake Kit for 2005–2011 Toyota Tacoma 4.0L V6 (1GR-FE Engine)

Compatible with Manual & Automatic Transmissions

About Your 2005-2011 Toyota Tacoma 4.0L V6

The second-generation Toyota Tacoma (2005-2011) with the 4.0L V6 1GR-FE engine is known for its legendary reliability and off-road capability. This 236-horsepower engine delivers dependable performance, but the factory air intake system is designed with noise reduction and cost in mind—not maximum performance.

Factory Engine Specifications

Unleash Hidden Performance

Our high-performance Cold Air Intake Kit is engineered specifically for your Tacoma's 1GR-FE engine. By replacing the restrictive factory air box with a free-flowing aluminum intake system, you'll unlock power that's been waiting beneath the hood.

Performance Gains

• Horsepower Increase: 8-10% gain (approximately 19-24 HP)
• Estimated Total Power: 255-260 HP (up from 236 HP factory)
• Torque Increase: 8-10% gain (approximately 21-27 lb-ft)
• Estimated Total Torque: 287-293 lb-ft (up from 266 lb-ft factory)
• Installation Time: Under 1 hour with basic hand tools

Premium Components

T-304 Aluminum Intake Pipe

Lightweight, corrosion-resistant polished aluminum construction provides smooth, unrestricted airflow with a show-quality chrome finish.

Carbon-Black Heat Shield

Powder-coated steel heat shield isolates the air filter from engine heat, ensuring cooler, denser air for maximum power. Keeps intake air temperatures 20-30°F cooler than factory setup.

Washable Cone Filter

High-flow, reusable air filter delivers superior filtration and performance. Clean and reuse for life—no costly replacements needed.

Complete Hardware Kit

Everything you need for installation included: clamps, brackets, hardware, and detailed instructions.

Performance Benefits

• Increased Horsepower & Torque: Gain 19-24 HP and 21-27 lb-ft of torque across the RPM range
• Enhanced Throttle Response: Immediate response when you press the accelerator, especially noticeable at low and mid RPM
• Improved Fuel Economy: More efficient combustion can lead to better MPG under normal driving conditions
• Aggressive Intake Sound: Deep, sporty growl that lets you hear your engine breathe
• Better Towing Performance: Increased low-end torque helps when hauling heavy loads
• Cooler Intake Temperatures: Heat shield keeps air temperatures significantly cooler than factory setup
• Long-Term Savings: Washable filter eliminates the need for expensive disposable replacements
• Warranty-Safe: Designed to comply with emissions standards and won't void your vehicle warranty

Perfect Fitment Guaranteed

Compatible Models

• 2005 Toyota Tacoma 4.0L V6
• 2006 Toyota Tacoma 4.0L V6
• 2007 Toyota Tacoma 4.0L V6
• 2008 Toyota Tacoma 4.0L V6
• 2009 Toyota Tacoma 4.0L V6
• 2010 Toyota Tacoma 4.0L V6
• 2011 Toyota Tacoma 4.0L V6

Works with all configurations: PreRunner, TRD Sport, TRD Off-Road, X-Runner, Access Cab, Double Cab, 4x2, 4x4, Manual and Automatic transmissions

Easy Installation

Tools Required: Basic hand tools (wrenches, screwdrivers, pliers)

Installation Steps

1. Remove the factory air box and intake tube
2. Install the heat shield using provided hardware
3. Mount the aluminum intake pipe and secure all connections
4. Attach the cone air filter
5. Double-check all clamps and connections
6. Disconnect battery for 30 seconds to reset ECU
7. Reconnect battery and enjoy your new performance!

Pro Tip: After installation, disconnect your battery for 30 seconds to allow the ECU (Engine Control Unit) to reset and adapt to the increased airflow. This ensures optimal performance and fuel mapping.

Why Upgrade from Factory?

The factory air intake system on your Tacoma prioritizes cost reduction and noise suppression over performance. The restrictive air box and intake tube limit airflow to your engine, leaving power on the table.

Factory Intake Limitations

• Narrow intake tubing creates turbulence and restriction
• Paper air filter requires frequent replacement
• Multiple bends and turns reduce airflow efficiency
• Heat from engine bay warms incoming air, reducing power
• Designed for noise reduction, not performance

Our cold air intake system addresses all these issues, delivering cooler, denser air to your engine for measurable performance gains you can feel every time you drive.

Key Features

• Boosts horsepower by 19-24 HP (8-10% gain)
• Increases torque by 21-27 lb-ft (8-10% gain)
• Made from T-304 lightweight aluminum with a polished chrome finish
• Steel heat shield with carbon-black coating for heat protection and durability
• High-quality washable & reusable air filter – no need for frequent replacements
• Improves throttle response at low and mid RPM ranges
• Produces an intense, deep sporty sound
• All mounting hardware included – no extra parts needed
• Easy installation using basic hand tools (under 1 hour)
• Will not void your vehicle warranty

What's Included

• Polished T-304 aluminum intake pipe
• Carbon-black powder-coated steel heat shield
• High-flow washable and reusable cone air filter
• All necessary mounting brackets and hardware
• Stainless steel clamps
• Detailed installation instructions with photos
• Filter cleaning and re-oil instructions

Performance You Can Feel

This Cold Air Intake Kit replaces your restrictive factory air box, improving airflow and combustion efficiency for noticeable gains in performance and fuel economy. With an estimated 19-24 additional horsepower and 21-27 lb-ft of extra torque, you'll experience better throttle response, enhanced acceleration, and a bold, throaty engine tone every time you hit the gas. Your Tacoma will reach approximately 255-260 HP and 287-293 lb-ft of torque with this upgrade.