Cold Air Intake System for 2010–2015 Chevrolet Camaro SS 6.2L V8 (LS3) - Increased Output & Performance Sound

This cold air intake system is designed to replace the factory air box and intake tube on 2010–2015 Chevrolet Camaro SS models equipped with the 6.2L V8 engine. The system reduces intake restriction by using polished aluminum piping and a high-flow air filter, allowing increased air volume to reach the engine. This results in improved throttle response, enhanced airflow efficiency, and measurable gains in horsepower and torque across the RPM range.

The intake uses larger diameter aluminum tubing compared to the factory intake tract, creating a less restrictive path for incoming air. The high-flow filter is engineered to provide superior filtration while maintaining lower restriction than factory paper elements. The included heat shield isolates the filter from engine bay heat, ensuring your V8 breathes cooler, denser air for consistent performance.

Vehicle Fitment

• 2010–2015 Chevrolet Camaro SS (6.2L V8 Engine / LS3)

Performance & Design

Airflow Optimization: The system is engineered to improve airflow efficiency by eliminating restrictive elements in the factory air box assembly. The mandrel-bent aluminum piping provides a smoother, less restricted path for incoming air compared to the factory intake tube. By providing the LS3 engine unrestricted access to cooler air, the system delivers noticeable gains in horsepower and torque.

Throttle Response: The reduced intake restriction allows the engine to draw air more efficiently during acceleration. This results in sharper throttle response and crisper power delivery throughout the RPM range. The improved combustion efficiency from denser air intake may also contribute to modest fuel economy gains during steady-state highway cruising.

Construction & Materials

Polished Aluminum Construction: The intake pipe is constructed from T6061 lightweight aluminum, which provides excellent corrosion resistance and heat dissipation. The polished finish provides a show-quality appearance under the hood while maintaining structural integrity across extreme engine bay temperature ranges.

Filter & Shield Design: The high-flow air filter uses multi-layer media engineered for exceptional filtration and maximum airflow. The filter is washable and reusable, designed to withstand years of use. The system features a reflective heat shield that blocks radiant engine heat, maintaining lower intake temperatures compared to open-filter designs without shielding.

Features & Components

• T6061 polished aluminum intake piping
• High-flow washable and reusable air filter
• Reflective heat shield to minimize heat soak
• Direct replacement for factory air box and intake tube
• Reduces intake restriction for improved airflow
• Premium silicone couplers with stainless steel clamps
• Enhances throttle response and power delivery
• Produces an aggressive V8 intake sound under acceleration
• Reusable filter reduces long-term maintenance costs
• Compatible with factory engine management system

What's Included

• 1× Polished Aluminum Air Intake Pipe
• 1× High-Flow Washable Air Filter
• 1× Reflective Heat Shield
• 2× Silicone Couplers with Stainless Steel Clamps
• Complete mounting hardware kit

Installation

• Direct bolt-on upgrade for factory air box and intake tube
• Uses existing factory mounting points where applicable
• No cutting or drilling required for standard installation
• Installation time approximately 45–60 minutes
• Basic hand tools required (screwdrivers, socket wrenches)

Installation Note: After installation, disconnect the negative battery terminal for approximately 30 seconds to allow the engine control unit (ECU) to reset. This allows the ECU to recalibrate fuel delivery and ignition timing parameters to optimize performance with the modified airflow characteristics. Professional installation is recommended if you are not comfortable with basic automotive work.

Filter Maintenance

Inspection Schedule: Inspect the air filter every 5,000 miles. Driving conditions such as dusty environments or high-performance track use may require more frequent inspection and cleaning.

Cleaning Procedure: Remove the filter from the intake tube. Gently tap the filter to remove loose debris. Apply an appropriate air filter cleaning solution to the element and allow it to soak for approximately 10 minutes. Rinse thoroughly with low-pressure water from the inside out until water runs clear. Allow the filter to air dry completely before re-oiling (if applicable) and reinstalling. Ensure the filter is 100% dry to prevent moisture from entering the intake tract.

Compatibility Requirements

Engine Verification: This intake system is designed specifically for 2010–2015 Chevrolet Camaro SS models with the 6.2L V8 engine. Verify your vehicle's engine and model year before purchase to ensure proper fitment. The system is designed to work with factory engine management components without requiring additional custom tuning.