Cold Air Intake for BMW E46 323/325/328/330 (1998-2005) I6 Engine

Fits: 

1998-2005 BMW E46 323/325/328/330 with I6 Engine 
 E46 3-Series 323 / 325 / 328 / 330 All models

(Fits Auto & Manual Transmission) 

The air intake kit can help your engine to draw more cold air resulting in better throttle response and higher explosive horsepower output
This air intake kit will increase 7-10% of Horsepower and 6-8% of Torque
Easy to install and easy to fit with simple tools
No additional parts will be needed for installation after you purchase this kit
This combo includes
T6063 Aluminum High Quality Finished Intake pipe as shown in the picture
High quality built Washable and Reusable Air Filter as shown in the picture
All necessary mounting hardwares, vacuum hoses and reducers will be included like shown in the picture
MAF sensor adapter (This will be included only if your car needs one for installation, some cars may not need it)
A General Installation instruction will be included or message us for help if needed
**product is not CARB legal, certificate not included. Off road use only. Professional installation is highly recommended and we are not responsible for any mechanical failure if installed incorrectly**

The BMW E46 323 325, 328, and 330 1998-2005 I6 Engine is an incredible engine, and one of the best ways to maximize its performance is with a Cold Air Intake. Cold Air Intakes are a great way to increase the power output of your engine while increasing fuel economy. Cold Air Intakes work by replacing the factory air filter with a larger, more efficient unit. The larger air filter allows for more air to get into the engine, and the colder air helps the combustion process. This results in more power and greater fuel efficiency. Additionally, the larger air filter can trap more dirt, debris, and other contaminants before they can enter the engine, helping to keep it running at its peak performance for longer. Installing a Cold Air Intake on your BMW E46 323 325, 328, or 330 1998-2005 I6 Engine is a relatively simple process. The first step is to remove the factory air filter, then install the cold air intake. This is typically done by unscrewing the screws that hold the factory air filter in place and then replacing it with the cold air intake unit. Once the cold air intake is in place, you can then reattach the filter cover and reconnect the air intake hose to the intake manifold.

Why change your factory air box for an intake?

- Gain more Horsepower
- Better Acceleration
- Improved Fuel Economy
- Enhanced Sound - A deeper or throaty tone
- Sporty Engine Look
- Spend Less on Filters - Can be cleaned and re-oiled
Installation is fairly easy and only involves removal of your factory air box.
Basic tools are required including screw drivers and socket wrenches to remove the factory air box. You can also search on YouTube for videos showing air box removal for your vehicle.
Most customers can install an aftermarket air intake within 1 hour
It is advised to RESET your battery terminal for a few seconds so your engine computer can re-learn the increase in air flow. Always disconnect your battery when performing engine work.