Stage 3 Performance Chip OBDII Module
- Get Maximum Performance With your Engine
- Custom Tuned for your vehicle model and engine type
- Again up to 40HP and 40TQ
- Engine output by as much as 15% improved
- Enhances throttle response, acceleration and low end torque.
- Preserves smog tests.
- Peak up acceleration by up to 20%.
- Results in higher top end speed
- Design and Made in USA.
- 5 minutes installation with under vehicle dash with OBD2 plug required
- Immediate effective are seen, no ECU learning
- Stops flat spots or throttle response.
- 100% Money-Back Guarantee!
- Lifetime Warranty
- Reliable and 100% Reversible Installation
- Remember WORKS ONLY on your model if you have a 1996+ Vehicle with OBD2 PORT! It is possible this product may not work on some sub models. If this is the case please contact us for refund. Please no negative feedback.
Easy to install True Plug and Play on cars 1996+ with OBD2 port.Performance Tuning has become one of the more popular solutions to unleash hidden Horse Power and Torque from your vehicle. With the increase in demand for easy tuning, JDM has finally released its newest plug and play tuner module, The JDM Pro-AM tuner. The JDM Pro-AM has become one of the easiest performance chip tuning module to install on the market, with an easy one step plug and play installation that is done through your OBD2 Connection. The JDM Pro-AM downloads real time data through your OBD2 connection allowing the module to study your driving habits over a period of one to two weeks to optimize the ignition spark advance, air to fuel ratios and transmission shifting for the ultimate in power and mileage gains. Increasing your throttle response, low end torque and acceleration. Proven to allow for better street performance, towing capabilities, and better fuel economy. The JDM Pro-AM will work with all aftermarket performance products. Anything from Intakes, exhaust systems, mass air flow sensors, throttle body spacers, etc. 50 State smog legal, and will not void any factory warranty.
Increase power and dramatically improve low end and torque. Crisp acceleration will blow everybody off the line. Installation is easy, no special tools or skills required. You will receive 20-40 extra horsepower & extremely improve acceleration up to 20% depending on the factory engine performance and other modifications you may have. No removing or taking apart your ECU is needed. No soldering. This stage 3 upgrade kit is designed to fool the computer and trigger greater horsepower, torque and acceleration. You will enjoy a refreshed engine, with outstanding acceleration without the typical flat spots. Detailed instructions are included.
What is my vehicle is Supercharged or Turbo charged?
We generally do not recommend installation on Turbo-charged models. There is no problem with supercharged models. If you have factory turbo charger, we do not recommend this product for you.
I already have a Power Programmer or Handheld Tuner installed?
No problem. This module will work with all aftermarket power programmers, tuners and OBDII modules. However, you must have access to your OBD2 port. The product must be plugged in at all times to your OBD2 port.
I have an Automatic or Manual? Does it matter?
No worries. This device will work with Automatic and Manual transmissions.
What is the warranty?
We offer lifetime warranty on the module. If anything ever happens to it, let us know and we can send you a replacement right away.
Will this Performance Kit void my warranty?
No! Our product will not void your warranty. All consumers are protected by law under the Magnuson-Moss Warranty Act. The vehicle manufacture cannot void your entire vehicles warranty due to aftermarket accessories.
Will the Module Damage my vehicles engine?
No! Since our performance chip module only sends a signal to the vehicle computer, it only triggers the factory engine control module to adjust itself to a more optimal fuel mixture and timing curve. This means your fully protected by the built in safe gaurds of your computer. These performance chips have been tested over and over and proven not to affect your vehicles engine or electrical system in any way.
How hard is installation? Can I install myself?
Simple. Plug unit to your your OBD2 port while vehicle is off. Turn on and your ready to go. This product must be plugged in at all times. You can mount it under your dash with 3M Tape.
Is this a resistor?
No. It connects to your OBD2 port. We modify readings to your ECU, not resistance like those cheap chips. ECU sensors signals cannot be tricked by cheap resistors.